Which coil to choose for the feeder: properties, characteristics, TOP popular models

Feeder fishing is different from classic fishing. Success depends on the right equipment. We have already written about the features of choosing feeder hooks. In this article, we will touch on the even more important topic of selecting feeder coils. Models without reels are budget, they are, to put it mildly, not the most profitable purchase, justified only by a sudden call to go fishing on vacation. As a rule, inertialess models of coils with certain performance qualities are in use. But how to choose a reel for a certain spinning and tackle? To do this, let's look at the main characteristics and properties of the coils.

The main characteristics of the coil for the feeder

So, feeder coils consist of a basic set of components:

• housing with drive mechanism
• foot for attaching to a spinning rod
• rotor with built-in shackle for laying line
• spools

The handle is located on the side. Budget coils for the feeder have a composite body, while more reliable models are made in one piece. This design allows you to make long casts, install light nozzles and minimize line tangling. However, the disadvantages of the solid model are the relatively high cost and the likelihood of monofilament twisting.

The choice of a coil for a feeder is based on the study of such characteristics:

• Number of bearings. They provide smooth running and durability. The number of bearings is indicated after the inscription ball bearing, the recommended number is from 3 to 9 pcs.
• Gear ratio. You can choose from a Teben spinning reel with gear ratios from 6.3:1 to 3.2:1. This value indicates the ratio of the number of revolutions of the line layer to the revolutions of the handle. The gear ratio of the coil is one of the key indicators.
• Friction brake. Needed to automatically bleed the fishing line when significant loads appear. Can be located in the front or rear of the structure.
• Spool size. The recommended Shimano size is 3000. This spool is suitable for Teben rods up to 3.9m.
• Bytrainer. This is one type of brake, needed to instantly stop the fishing line. After casting, it must be turned off. A reel with a baitrunner is convenient, but its cost is higher than that of standard models.

All feeder reels must be sensitive to bites and sharp jerks of tackle. Correctly using the advantages and design features of the models, you can achieve good results.

Spool classification for reels

An important element that you need to pay special attention to is spools for coils. They are designed for winding fishing line, differ in size, material of manufacture, shape. Additionally affect the size of the coil for the feeder. The length of the spinning depends on the characteristics of this component.

Before choosing a feeder rod and reel, you need to familiarize yourself with the main parameters of the spool:

• The size for the feeder is from 2000 to 4000 according to Shimano classification.
• Manufacturing material. For budget feeder coils, the base is made of plastic. This is fine for regular line, but it can be a problem when using braided line. The alternative is metal or polycarbonate. They are wear resistant.
• Spool shape. Classic - an even deep cylinder that accommodates the maximum number of turns of fishing line. Air spool has a smaller volume and is not intended for use with reeling, it is installed in some Teben models. Cone used for long-distance casting.

For beginners, models of reels for feeder fishing with a classic spool are suitable. In the process of developing fishing skills, you can move on to more complex configurations.

Choosing a reel according to fishing technique

The choice of feeder reel is influenced by the method of fishing. Each fisherman develops an individual casting technique over time, based on general recommendations. Additional factors are the characteristics of the place of fishing and the estimated size of future prey. It is important that during hooking and pulling the braid does not get tangled, the jerks of the fish are compensated as much as possible.

Recommendations for the selection of gear:

• Depending on the fishing distance. Up to 30 meters use a picker, it is recommended to install a feeder reel with a baitrunner. If the distance is up to 60 m, you need a feeder 3.9 m long, 4000. For long-distance casting, a rod up to 4.6 m, 6000 is used
• Weight. For long-term fishing, you need to reduce the weight of all gear. The best choice is models with a mass of up to 400 grams. If you need a donkey reel, you can install a capacious design with a weight of up to 500 grams.
• A large number of casts can cause incorrect monofilament laying. To avoid this, models with a so-called endless screw are installed. It ensures uniform distribution of the braid over the entire surface.

The optimal length of the monofilament for the feeder is up to 150 m. Therefore, you can purchase a device with a shallow shaft so as not to compensate for the empty space with backing in the future.

Rating of the best models of coils for the feeder

To select the optimal models, you need to make a detailed analysis of products from well-known manufacturers. There are many ratings for spinning reels, but they can vary significantly from each other. The list of the best was compiled based on real feedback from fishermen and a study of the performance properties of structures.

The best reels according to many users:

• Special model Banax GT Extreme 3000, designed for catching big fish. It is used for sea fishing, it has several features in its configuration - a power handle, bearings are hidden, a friction clutch up to 25 kg. The mechanism is completely protected from water.

• Teben AQR-400 has a front friction brake and can be used for catching large and medium fish. The design includes a bayrunner. Features Teben - can hold up to 140 meters of fishing line, 9 bearings are included in the package. Convenient option for beginners and professionals.

• Daiwa TD-Sol has a soft ride and at the same time traction. Daiwa products are of good quality and minimal weight. The body of Daiwa is made of aluminum alloy. There is an instantaneous operation of the friction clutch. The work of the line stacker is stable, the loops are not reset. Feature - compactness, attractive appearance.

• Preston PC-R 6000 Reel is designed for big fish fishing. Features of the Preston model - the number of turns of the fishing line has been increased, the laying has been improved. The rotor is balanced, 9 bearings are installed. The disadvantages include weight - 473 grams.

• Kaida Dragon 3000 is inexpensive and affordable. At the same time, the required performance characteristics are preserved - light weight, smooth running. Kaid's body is made of graphite.

In addition to the technical characteristics of the above models, you need to know how to use their advantages. To do this, you should gain practical experience in feeder fishing, learn the advantages and disadvantages of equipment from different manufacturers.